RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Chapter 3-Additional Conferencing Information
Table 3-13 Moving Participants from the Entry Queue to the Destination conference or between
conferences Based on the Encryption Settings (Continued)
Destination
Conference
Encryption Setting
Encrypt When
Possible
Move succeeds,
connected
encrypted
* System Flag = FORCE_ENCRYPTION_FOR_UNDEFINED_PARTICIPANT_IN_WHEN_AVAILABLE_MODE
Recording Link Encryption
Move succeeds,
connected
encrypted
Move succeeds,
connected nonencrypted
Connected only
if endpoint was a
defined
participant in the
source
conference.
Otherwise, move
fails.
Recording Links are treated as regular participants, however the
ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF System Flag must
be set to YES if a non-encrypted Recording Link is to be allowed to connect to an encrypted
conference.
Table 3-14 summarizes the connection possibilities for a Recording Link that is to be
connected to a conference for each of the conference profile and Entry Queue encryption
options.
Table 3-14 Connections by Recording Link and Conference Encryption Settings
Conference
Profile Setting
Encrypt All
Recording Link Connection Status according to flag:
ALLOW_NON_ENCRYPT_RECORDING_
LINK_IN_ENCRYPT_CONF
YES NO
Connected encrypted if possible,
otherwise connected nonencrypted.
Connected only if encrypted,
otherwise disconnected
No Encryption Connected non-encrypted Connected non-encrypted
Encrypt when possible
Current Participant Encryption Status
Encrypted Non-Encrypted
*Flag = NO *Flag = YES *Flag = NO *Flag = YES
Connected encrypted if possible,
otherwise connected nonencrypted.
Connected encrypted if possible,
otherwise connected nonencrypted.
Polycom, Inc. 3-37