RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Chapter 1-Conference Profiles
When Custom is selected, the current position becomes the initial position for Site Names
position adjustments using the Horizontal and Vertical Position sliders.
Preset
Position
LeftTop
The Horizontal and Vertical Position sliders are automatically adjusted to match the
Display Position drop-down menu preset selection.
Moving the Horizontal and Vertical Position sliders
>> Drag the Horizontal and Vertical Position sliders to adjust the position of the Site Names
display.
The Site Names display moves from its current position according to the slider
movement.
Dragging the sliders causes the Display Position drop-down menu field to be set
Custom.
Selecting Custom and moving the Horizontal and Vertical Position sliders
1 In the Display Position drop-down menu select Custom.
The current Site Names position becomes the initial position for Site Names position.
Dragging the Horizontal and Vertical Position sliders moves the Site Names from this
position.
2 Drag the Horizontal and Vertical Position sliders to adjust the position of the Site Names
display.
For a detailed description of the Site Names dialog box options, see Table 1-8 on page 1-29.
Polycom, Inc. 1-41