19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Polycom</strong> <strong>RMX</strong> 1500/<strong>2000</strong>/4000 Administrator’s <strong>Guide</strong><br />

12 Click the SIP Servers tab.<br />

13 Modify the following fields:<br />

Table 15-9 Default IP Network Service – SIP Servers<br />

Field Description<br />

SIP Server Select:<br />

• Specify – to manually configure SIP servers.<br />

• Off – if SIP servers are not present in the network.<br />

SIP Server Type Select:<br />

• Generic - for non Microsoft environments.<br />

• Microsoft - for Microsoft environments.<br />

Transport Type Select the protocol that is used for signaling between the MCU and<br />

the SIP Server or the endpoints according to the protocol supported<br />

by the SIP Server:<br />

UDP – Select this option to use UDP for signaling.<br />

TCP – Select this option to use TCP for signaling.<br />

TLS – The Signaling Host listens on secured port 5061 only and all<br />

outgoing connections are established on secured connections. Calls<br />

from SIP clients or servers to non secured ports are rejected.<br />

The following protocols are supported: TLS 1.0, SSL 2.0 and SSL<br />

3.0.<br />

15-18 <strong>Polycom</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!