RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Conferences Pane
The Conferences pane lists all the ongoing conferences from all the MCUs that are connected
and monitored along with their MCU, Status, Conference ID, Start Time and End Time data.
The number of ongoing conferences is displayed in the pane’s title.
The Conferences list toolbar contains the following buttons:
Save Conference
to Template
Delete Conference
New Conference
MCU Name
If Conference Recording is enabled the following buttons are enabled:
• Start/Resume Recording – start/resume recording.
• Stop Recording – stop recording.
• Pause – toggles with the Start/Resume button.
Monitoring conferences
New conferences run on MCUs selected for Monitoring are automatically added to the
Conferences list. You can sort the conferences by MCU by clicking the MCU column heading
in the Conferences table. Conferences run on MCUs that are connected but not monitored are
not listed.
Using Windows multiple selection methods to select conferences, participants from several
conferences running on different MCUs can be listed in the Participants list pane.
Starting a new conference
When starting a new conference, you must first select the MCU to run the conference in the
MCUs pane.
RMX Management
Start/Resume/Pause Recording
Stop Recording
Toolbar
List Headers
Conference Data
The RMX Management pane lists the entities of the selected MCU that need to be configured
to enable the RMX to run conferences. Only users with Administrators permission can
modify these parameters.
The RMX Management pane is divided into two sections:
• Frequently Used – parameters often configured monitored or modified.
• Rarely Used – parameters configured during initial system set-up and rarely modified
afterward.
19-10 Polycom, Inc.