RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Table 16-9 New Conference IVR Service Properties - Video Services Parameters (Continued)
Video Services Description
Invite Participant See "Inviting Participants using DTMF” on page 16-37.
Dial out protocols
order
DTMF forward
duration
Select the order of the network protocols that will be used by the
system to dial the destination number. The system will start dialing
using the first protocol, and if the call is not answered it will continue
with the second, third and fourth protocols (if they are enabled) until
the call is answered. By default, H.323 is set as the first protocol and
SIP as the second while the remaining protocols are disabled (set to
Off).
For PSTN calls, select the PSTN protocol and not ISDN.
Set PSTN before ISDN if both PSTN and ISDN protocols are
required.
Use this field when connecting to another conferencing entity with an
IVR, requiring the input of a password, destination number or ID.
Enter the number of seconds that the system will wait for the input of
additional DTMF digits such as a password or conference number.
Range: 10 - 600 seconds
Default: 60 seconds.
25 If the video slide file was not uploaded to the MCU prior to the IVR Service definition,
click the:
— Add Slide - Low Resolution button to upload a Low Resolution Slide.
— Add Slide - High Resolution button to upload a High Resolution Slide.
The Install File dialog box opens. The uploading process is similar to the uploading of
audio files. For more information, see step 6 on page 16-9.
The video slide must be in a .jpg or .bmp file format. For more information, see "Creating a Welcome
Video Slide” on page 16-32.
26 Click the DTMF Codes tab.
The New Conference IVR Service - DTMF Codes dialog box opens.
16-18 Polycom, Inc.