19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Table 21-1 System Flags – MCMS_PARAMETERS (Continued)<br />

Flag Description<br />

LEGACY_EP_CONTENT_DE<br />

FAULT_LAYOUT<br />

MAX_CONF_PASSWORD_R<br />

EPEATED_CHAR<br />

Chapter 21-System Configuration Flags<br />

Defines the video layout to be displayed on the screen of the<br />

legacy endpoints when switching to Content mode.<br />

Default value: CP_LAYOUT_1P7 (1+7).<br />

For a detailed list of possible flag values for the various video<br />

layouts, see Table 21-6,<br />

“LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag<br />

Values,” on page 21-33.<br />

Allows the administrator to configure the maximum number of<br />

consecutive repeating characters that are to be allowed in a<br />

conference password.<br />

Range: 1 - 4<br />

Default: 2<br />

MAX_CP_RESOLUTION The MAX_CP_RESOLUTION flag value is applied to the<br />

system during First Time Power-on and after a system<br />

upgrade. The default value is HD1080.<br />

All subsequent changes to the Maximum CP Resolution of<br />

the system are made using the Resolution Configuration<br />

dialog box.<br />

Possible flag values:<br />

• HD1080 – High Definition at 30 fps (MPM+ / MPMx)<br />

• HD720 – High Definition at 60 fps<br />

(MPM+ / MPMx)<br />

• HD – High Definition at 30 fps<br />

• SD30 – Standard Definition at 30 fps<br />

• SD15 – Standard Definition at 15 fps<br />

• CIF – CIF resolution<br />

Default: HD1080<br />

For more information see "Resolution Configuration for CP<br />

Conferences” on page 2-12.<br />

MAX_INTRA_REQUESTS_P<br />

ER_INTERVAL_<br />

MAX_INTRA_SUPPRESSIO<br />

N_DURATION_IN_SECOND<br />

S_<br />

MAX_NUMBER_OF_MANAG<br />

EMENT_SESSIONS_PER_S<br />

YSTEM<br />

Enter the maximum number of refresh (intra) requests for the<br />

Content channel sent by the participant’s endpoint in a 10<br />

seconds interval that will be dealt by the <strong>RMX</strong> system. When<br />

this number is exceeded, the Content sent by this participant<br />

will be identified as noisy and his/her requests to refresh the<br />

Content display will be suspended.<br />

Default setting: 3<br />

Enter the duration in seconds to ignore the participant’s<br />

requests to refresh the Content display.<br />

Default setting: 10<br />

Defines the maximum number of concurrent management<br />

sessions (http and https connections) per system.<br />

Value: 4 - 80<br />

Default: 80<br />

<strong>Polycom</strong>, Inc. 21-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!