19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Connecting to the <strong>RMX</strong> via Modem<br />

Appendix G-Configuring Direct Connections to <strong>RMX</strong><br />

Remote access to the <strong>RMX</strong>’s Alternate Management Network is supported via an external<br />

PSTN IP modem.<br />

To connect via modem to the Alternate Management Network the following procedures must<br />

be performed:<br />

1 Procedure 1: Install the <strong>RMX</strong> Manager – the web client enables direct access to the<br />

<strong>RMX</strong> for support purposes.<br />

2 Procedure 2: Configure the modem – by assigning it an IP address on a specific subnet<br />

in the Alternate Management Network.<br />

3 Procedure 3: Create a dial-up connection – using the Windows New Connection Wizard.<br />

4 Procedure 4: Connect to the <strong>RMX</strong> – via the <strong>RMX</strong> Manager.<br />

Procedure 1: Install the <strong>RMX</strong> Manager<br />

Before installing the <strong>RMX</strong> Manager, verify that you have at least 150Mb of free space on your<br />

workstation.<br />

For more information see "Installing the <strong>RMX</strong> Manager” on page 19-1.<br />

Procedure 2: Configure the Modem<br />

Configure the modem as follows:<br />

• IP address – near 169.254.192.nn<br />

• Subnet Mask – 255.255.240.0<br />

None of the reserved IP addresses listed in Table G-1 on page G-4 should be used for the IP<br />

Address.<br />

<strong>Polycom</strong>, Inc. G-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!