RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Appendix H-Setting the RMX for Integration Into Microsoft Environment
Supporting Remote and Federated Users in Office Communications Server ICE
Environment
To enable the remote and Federation connections the following operations must be
performed:
• Create an Active Directory account for the RMX that will be used for registering and
operating in the MS ICE environment
• Enable the RMX User Account for Office Communication Server
• Configure the RMX for ICE dialing for more details, see "Configuring the RMX for
Federated (ICE) Dialing” on page H-66.
To place federated calls between Domain A and Domain B in ICE environment sub domains must be
federated to the main domain or the RMX system must be installed on a main domain.
The RMX can also be set for Matched URI Routing and/or Numerical Dialing to Meeting
Rooms. For more details, see "Setting the Matched URI Dialing Method” on page H-5 and
"Setting the Numerical Dialing Method” on page H-11.
Creating an Active Directory Account for the RMX
The User account created for the RMX is used for registration in the Office Communication
Server and to automatically synchronize with the STUN and relay (Edge) servers.
To add the RMX user to the Active Directory:
1 Go to Start > Run and enter dsa.msc to open the Active Directory Users and Computers
console
2 In the console tree, select Users > New > User.
Polycom, Inc. H-29