19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Polycom</strong> <strong>RMX</strong> 1500/<strong>2000</strong>/4000 Administrator’s <strong>Guide</strong><br />

6 Click the DNS tab.<br />

7 Modify the following fields:<br />

Table 15-3 Default Management Network Service – DNS<br />

Field Description<br />

MCU Host Name Enter the name of the MCU on the network.<br />

Default name is <strong>RMX</strong><br />

DNS Select:<br />

• Off – if DNS servers are not used in the network.<br />

• Specify – to enter the IP addresses of the DNS servers.<br />

Note: The IP address fields are enabled only if Specify is selected.<br />

Register Host Names<br />

Automatically to DNS<br />

Servers<br />

8 <strong>RMX</strong> <strong>2000</strong> only: Click the LAN Ports tab.<br />

Select this option to automatically register the MCU Signaling Host<br />

and Shelf Management with the DNS server.<br />

Local Domain Name Enter the name of the domain where the MCU is installed.<br />

DNS Servers Addresses:<br />

Primary Server<br />

Secondary Server<br />

Tertiary Server<br />

The static IP addresses of the DNS servers.<br />

A maximum of three servers can be defined.<br />

15-8 <strong>Polycom</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!