19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

— H263_ANNEX_T<br />

— H239_FORCE_CAPABILITIES<br />

— MIX_LINK_ENVIRONMENT<br />

— IP_LINK_ENVIRONMENT<br />

— FORCE_STATIC_MB_ENCODING<br />

— FORCE_RESOLUTION<br />

— SEND_WIDE_RES_TO_IP<br />

— DISABLE_WIDE_RES_TO_SIP_DIAL_OUT<br />

— SEND_SIP_BUSY_UPONRESOURCE_THRESHOLD<br />

Chapter 15-Network Services<br />

5 Click the Routers tab.<br />

6 Define the routers used in this network and that are other than the routers defined in<br />

the Management Network. The field definitions of the Routers tab are the same as for<br />

the Default Management Network. For more information see "Click the Routers tab.” on<br />

page 15-12.<br />

7 Click the DNS tab.<br />

8 Modify the following fields:<br />

Table 15-33 Default Management Network Service – DNS<br />

Field Description<br />

Service Host Name Enter the host name of this network Service. Each Network Service<br />

must have a unique Host Name otherwise an error message is<br />

displayed.<br />

DNS Select:<br />

• Off – if no DNS server is used in this network.<br />

• Specify – to enter the IP address of the DNS server used by this<br />

network service.<br />

Notes:<br />

• The IP address field is enabled only if Specify is selected.<br />

• Only one DNS can be define for the entire topology (that is, only<br />

one Network Service can include the DNS definition).<br />

<strong>Polycom</strong>, Inc. 15-57

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!