RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Table 21-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description
Chapter 21-System Configuration Flags
MIX_LINK_ENVIRONMENT In H.239-enabled MIH Cascading, when MGC is on level 1,
setting this flag to YES will adjust the line rate of HD Video
Switching conferences run on the RMX 1500/2000/4000 from
1920Kbps to 17897, 100bits/sec to match the actual rate of
the HD Video Switching conference running on the MGC.
Note: If the flag MIX_LINK_ENVIRONMENT is set to YES,
the IP_ENVIRONMENT_LINK flag must be set to NO.
NUMBER_OF_REDIAL Enter the number re dialing attempts required. Dialing may
continue until the conference is terminated.
Default: 3
PARTY_GATHERING_DURA
TION_SECONDS
The value of this System Flag sets the duration, in seconds, of
the display of the Gathering slide for participants that connect
to the conference after the conference start time.
Range: 0 - 3600
Default: 15
For more information see "Video Preview” on page 3-19.
PCM_FECC Determines whether the DTMF Code, ##, the Far/Arrow Keys
(FECC) or both will activate the PCM interface. This flag can
be also be used in combination with DTMF code definitions to
disable PCM.
Possible Values: YES / NO
Default: YES.
PCM_LANGUAGE Determines the language of the PCM interface.
Possible Values are: ENGLISH, CHINESE_SIMPLIFIED,
CHINESE_TRADITIONAL, JAPANESE, GERMAN, FRENCH,
SPANISH, KOREAN, PORTUGUESE, ITALIAN, RUSSIAN,
NORWEGIAN
Default: Current RMX Web Client language.
PRESERVE_ICE_CHANNEL
_IN_CASE_OF_LOCAL_MO
DE
When set to NO (default), local the ICE channel is closed after
applying CAC bandwidth management when Call Admission
Control is enabled in the local network.
When set to YES, the ICE channel is preserved open
throughout the call.
Default: NO
QOS_IP_AUDIO Used to select the priority of audio packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x88
QOS_IP_VIDEO Used to select the priority of video packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x88
REDIAL_INTERVAL_IN_SEC
ONDS
Enter the number of seconds that the RMX should wait before
successive re dialing attempts.
Range: 0-30 (Default: 10)
Polycom, Inc. 21-25