19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 15-1 Default Management Network Service – IP (Continued)<br />

Field Description<br />

Control Unit IP<br />

Address<br />

Shelf Management<br />

IP Address<br />

Chapter 15-Network Services<br />

IPv4 The IPv4 address of the <strong>RMX</strong> Control Unit. This IP<br />

address is used by the <strong>RMX</strong> Web Client to<br />

connect to the <strong>RMX</strong>.<br />

IPv6<br />

The IPv6 address of the <strong>RMX</strong> Control Unit. This IP<br />

address is used by the <strong>RMX</strong> Web Client to<br />

connect to the <strong>RMX</strong>.<br />

Note: Internet Explorer 7 is required for the<br />

<strong>RMX</strong> Web Client to connect to the <strong>RMX</strong> using<br />

IPv6.<br />

<strong>Polycom</strong>, Inc. 15-5<br />

All<br />

Click the All button to display the IPv6<br />

addresses as follows:<br />

• Auto - If selected, Site-Local and<br />

Global site addresses are displayed.<br />

• Manual if selected, only the Manual site<br />

address is displayed.<br />

IPv4 The IPv4 address of the <strong>RMX</strong> Shelf Management<br />

Server. This IP address is used by the <strong>RMX</strong> Web<br />

Client for Hardware Monitoring purposes.<br />

IPv6<br />

The IPv6 address of the <strong>RMX</strong> Shelf Management<br />

Server. This IP address is used by the <strong>RMX</strong> Web<br />

Client for Hardware Monitoring purposes.<br />

Note: Internet Explorer 7 is required for the<br />

<strong>RMX</strong> Web Client to connect to the <strong>RMX</strong> using<br />

IPv6.<br />

All<br />

Click the All button to display the IPv6<br />

addresses as follows:<br />

• Auto - If selected, Site-Local and<br />

Global site addresses are displayed.<br />

• Manual if selected, only the Manual site<br />

address is displayed.<br />

Subnet Mask Enter the subnet mask of the Control Unit.<br />

Note: This field is specific to IPv4 and is not displayed in Ipv6 only mode.<br />

Secured<br />

Communication<br />

Select to enable Secured Communication.<br />

The <strong>RMX</strong> supports TLS 1.0 and SSL 3.0 (Secure Socket Layer).<br />

A SSL/TLS Certificate must installed on the <strong>RMX</strong> for this feature to be<br />

enabled. For more information see "Secure Communication Mode” on<br />

page F-1.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!