RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Table 21-7 Automatic Password Generation Flags (Continued)
Flag Description
NUMERIC_CONF_PASS_DEFAULT_L
EN
NUMERIC_CHAIR_PASS_ DEFAULT
_LEN
Chapter 21-System Configuration Flags
This flag enables or disables the automatic generation of
conference passwords. The length of the automatically
generated passwords is determined by the flag value.
Possible values:
• 0 – 16, 6 default (non-secured mode)
• 0 and 9 – 16, 9 default (Enhanced Security Mode).
Enter 0 to disable the automatic generation of
passwords.
Any value other than 0 enables the automatic generation
of conference passwords provided the flag
HIDE_CONFERENCE_PASSWORD is set to NO.
If the default is used, in non-secured mode the system
will automatically generate conference passwords that
contain 6 characters.
This flag enables or disables the automatic generation of
chairperson passwords. The length of the automatically
generated passwords is determined by the flag value.
Possible values:
• 0 – 16, 6 default (non-secured mode)
• 0 and 9 – 16, 9 default (Enhanced Security Mode).
Enter 0 to disable the automatic generation of
passwords.
Any value other than 0 enables the automatic generation
of chairperson passwords provided the flag
HIDE_CONFERENCE_PASSWORD is set to NO.
If the default is used, in non-secured mode the system
will automatically generate chairperson passwords that
contain 6 characters.
If the default password length defined by the NUMERIC_CONF_PASS_DEFAULT_LEN or
NUMERIC_CHAIR_PASS_ DEFAULT LEN does not fall within the range defined by the
minimum and maximum length an appropriate fault is added to the Faults list.
Polycom, Inc. 21-37