19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Polycom</strong> <strong>RMX</strong> 1500/<strong>2000</strong>/4000 Administrator’s <strong>Guide</strong><br />

2 Define the following fields:<br />

Table 7-2 New Participant – General Properties<br />

Field Description<br />

Name Enter the name of the participant or the endpoint as it will be<br />

displayed in the <strong>RMX</strong> Web Client.<br />

The Name field can be modified using Unicode encoding.<br />

Endpoint Website (IP<br />

only)<br />

• English text uses ASCII encoding and can contain the most<br />

characters (length varies according to the field).<br />

• European and Latin text length is approximately half the length of<br />

the maximum.<br />

• Asian text length is approximately one third of the length of the<br />

maximum.<br />

Maximum field length in ASCII is 80 characters.<br />

The maximum length of text fields varies according to the mixture of<br />

character sets used (Unicode and ASCII).<br />

This name can also become the endpoint name that is displayed in<br />

the video layout. For more details about endpoint (site) names, see<br />

the <strong>RMX</strong> 1500/<strong>2000</strong>/4000 Getting Started <strong>Guide</strong>, “"Text Indication in<br />

the Video Layout” on page 3-32”.<br />

Note: This field is displayed in all tabs.<br />

Click the Endpoint Website hyperlink to connect to the internal<br />

website of the participant’s endpoint. It enables you to perform<br />

administrative, configuration and troubleshooting activities on the<br />

endpoint.<br />

The connection is available only if the IP address of the endpoint’s<br />

internal site is defined in the Website IP Address field.<br />

Dialing Direction Select the dialing direction:<br />

• Dial-in – The participant dials in to the conference. This field<br />

applies to IP participants only.<br />

• Dial-out – The MCU dials out to the participant.<br />

Note:<br />

• Dial-out is forced when defining an ISDN/PSTN participant.<br />

Type The network communication protocol used by the endpoint to connect<br />

to the conference: H.323, SIP or ISDN/PSTN.<br />

The fields in the dialog box change according to the selected network<br />

type.<br />

IP Address<br />

(H.323 and SIP Only)<br />

Enter the IP address of the participant’s endpoint.<br />

• For H.323 participant define either the endpoint IP address or<br />

alias.<br />

• For SIP participant define either the endpoint IP address or the<br />

SIP address.<br />

Note: This field is hidden when the ISDN/PSTN protocol is selected.<br />

7-4 <strong>Polycom</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!