RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Table 21-1 System Flags – MCMS_PARAMETERS (Continued)
Flag Description
MAX_NUMBER_OF_MANAG
EMENT_SESSIONS_PER_U
SER
MAX_PASSWORD_REPEAT
ED_CHAR
Defines the maximum number of concurrent management
sessions (http and https connections) per user.
Value: 4 - 80
Default: 10 (20 in Ultra Secure Mode)
Allows the administrator to configure the maximum number of
consecutive repeating characters to be allowed in a
password.
Range: 1 - 4
Default: 2
MCU_DISPLAY_NAME The name of the MCU that is displayed on the endpoint’s
screen when connecting to the conference.
Default: POLYCOM RMX 1500/POLYCOM RMX 2000/
POLYCOM RMX 4000 depending on the product type.
MIN_PASSWORD_LENGTH The length of passwords.
Possible value: between 0 and 20.
0 means this rule is not enforced, however this rule cannot be
disabled when the RMX is in Ultra Secure Mode.
In Ultra Secure Mode, passwords must be at least 15
characters in length (default) and can be up to 20 characters
in length.
For more details, see "Password Length” on page 14-11.
MIN_PWD_CHANGE_FREQ
UENCY_IN_DAYS
MIN_TIP_COMPATIBILITY_L
INE_RATE
Defines the frequency with which a user can change a
password.
Values: 0 -7.
0 (standard default) - users do not have to change their
passwords.
In Ultra Secure Mode the retention period is between 1
(default) and 7.
For details, see "Defining Password Change Frequency” on
page 14-12.
This flag determines the minimum line rate at which
conferencing entities such as an Entry Queue or Meeting
Room can be TIP-enabled and TIP-enabled endpoints can
connect to them.
CTS version 7 requires a minimum line rate of 1024 kbps and
will reject calls at lower line rates, therefore the System Flag
value should be 1024 kbps or higher.
0 means that no minimum line rate is enforced on the
conference for TIP connectivity.
Default: 1024
MS_ENVIRONMENT If YES, sets the RMX SIP environment to integrate with
Microsoft OCS solution.
Default: NO
21-10 Polycom, Inc.