RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Default Management Network
The procedure necessary to purchase and install certificates for the Default Management
Network of the RMX is unchanged and is described in the RMX 1500/2000/4000
Administrator’s Guide, "Secure Communication Mode” on page F-1.
Enabling Peer Certificate Requests
A new tab, Security, has been added to the Management Network Properties dialog box to
enable the Request Peer Certificate feature to be enabled.
The Request peer certificate check box must be selected before enabling Secured Mode. If it is
not selected an Active Alarm is created and a message is displayed stating that Secured
Communications Mode must be enabled.
To enable Request Peer Certificate:
1 In the RMX Management pane, click the IP Network Services entry.
2 In the IP Network Services list pane, double-click the Management Network entry.
3 Click the Security tab.
4 Select the Request Peer Certificate check box.
5 Click the OK button.
F-10 Polycom, Inc.