RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Chapter 4-Cascading Conferences
6 There are two methods to define the dialing string:
A Using the MCU’s IP Address and the Alias string.
B Using only the Alias string (requires a gatekeeper).
Method A (If no gatekeeper is used):
In the IP Address field, enter the IP address of the MGC hosting the destination
conference (Master conference).
In the Alias Name/Type field, enter the ID of the cascade-enabled Entry Queue (EQ), the
Conference ID and Password of the destination conference (Master Conference) as
follows:
EQ ID##Destination Conference ID##Password (Password is optional).
For Example: 1005##20006##1234
Cascade-enabled
EQ ID
Method B (Using a gatekeeper):
Destination
Conference ID
Password (optional)
In the Alias Name field, enter the MGC Prefix as registered in the gatekeeper, EQ ID,
Destination Conference ID, and Password, as follows:
MGC Prefix EQ ID##Conference ID##Password (Password is optional)
For Example: 9251005##20006##1234
MCU Prefix as
registered in the
gatekeeper
Cascade-enabled
EQ ID
Conference ID
Password (optional)
7 Click the Advanced tab and in the Cascade field, select the Slave option.
8 Click OK.
The cascade-enabled dial-out link is created and the system automatically dials out to
Polycom, Inc. 4-41