19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 21-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)<br />

Flag Description<br />

4 Click OK to close the New Flag dialog box.<br />

The new flag is added to the flags list.<br />

5 Click OK to close the System Flags dialog box.<br />

Chapter 21-System Configuration Flags<br />

TC_BURST_SIZE This flag regulates the Traffic Control buffer or maxburst size<br />

as a percentage of the participant line rate.<br />

Range: 1-30.<br />

TC_LATENCY_SIZE This flag limits the latency (in milliseconds) or the number of<br />

bytes that can be present in a queue.<br />

Range: 1-1000 (in milliseconds).<br />

V35_ULTRA_SECURED_SU<br />

PPORT<br />

VSW_CIF_HP_THRESHOLD<br />

_BITRATE<br />

VSW_HD720p30_HP_THRE<br />

SHOLD_BITRATE<br />

VSW_HD720p50-<br />

60_HP_THRESHOLD_BITR<br />

ATE<br />

VSW_HD1080p_HP_THRES<br />

HOLD_BITRATE<br />

VSW_RATE_TOLERANCE_<br />

PERECENT<br />

VSW_SD_HP_THRESHOLD<br />

_BITRATE<br />

This flag must be set to YES when deploying a Serial<br />

Gateway S4GW.<br />

Controls the Minimum Threshold Line Rate (kbps) for CIF<br />

resolution for High Profile-enabled VSW conferences.<br />

Default: 64<br />

Controls the Minimum Threshold Line Rate (kbps) for<br />

HD720p30 resolution for High Profile-enabled VSW<br />

conferences.<br />

Default: 512<br />

Controls the Minimum Threshold Line Rate (kbps) for<br />

HD720p50 and HD720p50 resolutions for High Profileenabled<br />

VSW conferences.<br />

Default: 832<br />

Controls the Minimum Threshold Line Rate (kbps) for<br />

HD1080p resolution for High Profile-enabled VSW<br />

conferences.<br />

Default: 1024<br />

Determines the percentage of bandwidth that can be<br />

deducted from the required bandwidth to allow participants to<br />

connect to the conference.<br />

For example, a value of 20 will allow a participant to connect<br />

to the conference if the allocated line rate is up to 20% lower<br />

than the conference line rate (or between 80% to 100% of the<br />

required bandwidth).<br />

Range: 0 - 75<br />

Default: 0<br />

Controls the Minimum Threshold Line Rate (kbps) for SD<br />

resolution for High Profile-enabled VSW conferences.<br />

Default: 128<br />

For flag changes (including deletion) to take effect, reset the MCU. For more information see<br />

"Resetting the <strong>RMX</strong>” on page 20-67.<br />

<strong>Polycom</strong>, Inc. 21-29

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!