RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom 1500/RMX 2000/4000 Administrator’s Guide
Table C-33 Event Fields for Events 107 and 109 - OPERATOR MOVE PARTY FROM CONFERENCE
and OPERATOR ATTEND PARTY (Continued) (Continued)
Field Description
Party ID The identification number of the participant who was moved, as assigned by
the MCU.
Destination Conf
Name
The name of the conference to which the participant was moved.
Destination Conf ID The identification number of the conference to which the participant was
moved.
Table C-34 Event Fields for Events 108, 112 - OPERATOR MOVE PARTY TO CONFERENCE,
OPERATOR ATTEND PARTY TO CONFERENCE
Field Description
Operator Name The login name of the operator who moved the participant to the conference.
Source Conf Name The name of the source conference.
Source Conf ID The identification number of the source conference, as assigned by the
MCU.
Party Name The name of the participant who was moved.
Party ID The identification number assigned to the participant by the MCU.
Connection Type The connection type, as follows:
0 - Dial-out
5 - Dial-in
Bonding Mode Note: This field is only relevant to ISDN/PSTN participants.
Number Of
Channels
Possible values are:
0 - Bonding is disabled
1 - Bonding is enabled
255 -Auto
Note: This field is only relevant to ISDN/PSTN participants.
The number of channels, as follows:
255 - Auto
Otherwise, in range of 1 - 30
Net Channel Width The bandwidth of each channel.
This value is always 0, which represents a bandwidth of 1B, which is the only
bandwidth that is currently supported.
Net Service Name The name of the Network Service.
An empty field “” indicates the default Network Service.
C-32 Polycom, Inc.