RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Table 21-1 System Flags – MCMS_PARAMETERS (Continued)
Flag Description
TERMINATE_CONF_AFTER
_CHAIR_DROPPED
Chapter 21-System Configuration Flags
If YES, sets conferences to automatically terminate if the
Chairperson disconnects from the conference.
Default: YES
ULTRA_SECURE_MODE When set to YES enables the Ultra Secure Mode. When
enabled, affects the ranges and defaults of the System Flags
that control:
• Network Security
• User Management
• Strong Passwords
• Login and Session Management
• Cyclic File Systems alarms
Default: NO
For a list of flags affected when the Ultra Secure Mode is
enabled, see "Auto Layout Configuration” on page 21-30.
USE_GK_PREFIX_FOR_PS
TN_CALLS
When set to YES the Gatekeeper Prefix is included in the
DTMF input string enabling PSTN participants to use the
same input string when connecting to an RMX whether the
RMX is a standalone MCU or part of a DMA solution
deployment.
Possible Values: YES / NO
Default: NO
For more information see "PSTN Dial-in Using GK Prefix” on
page 18-7.
USER_LOCKOUT If YES, a user is locked out of the system after three
consecutive Login failures with same User Name. The user is
disabled and only the administrator can enable the user
within the system.
Default: NO
Default in Ultra Secure Mode: YES
For details, see "User Lockout” on page 14-13.
USER_LOCKOUT_DURATIO
N_IN_MINUTES
USER_LOCKOUT_WINDOW
_IN_MINUTES
Defines the duration of the Lockout of the user.
Value: 0 - 480
0 means permanent User Lockout until the administrator reenables
the user within the system.
Default: 0
Defines the time period during which the three consecutive
Login failures occur.
Value: 0 - 45000
0 means that three consecutive Login failures in any time
period will result in User Lockout.
Default: 60
3 To modify a flag value, double-click or select the flag and click the Edit Flag button.
Polycom, Inc. 21-15