19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Polycom</strong> <strong>RMX</strong> 1500/<strong>2000</strong>/4000 Administrator’s <strong>Guide</strong><br />

<strong>Guide</strong>lines<br />

• Multiple Services system mode is a purchasable option and it is enabled in the MCU<br />

license.<br />

• Multiple Services system mode is enabled when the system configuration flag<br />

MULTIPLE_SERVICES is added and set to YES.<br />

The MULTIPLE_SERVICE System Flag cannot be set to YES when IPv6 Addressing is enabled.<br />

• This option is supported with MPM+ and MPMx media cards.<br />

• Multiple Network Services are supported in MCUs with at least 1024MB memory only.<br />

MCU units with memory of 512MB support only one IP Network Service.<br />

• Multiple Network Services are NOT supported with Microsoft ICE Environments.<br />

• Only IPv4 is supported for the definition of Multiple Network Services.<br />

• Up to two Network Services, one per LAN port, can be associated with each Media<br />

card.<br />

• On <strong>RMX</strong> <strong>2000</strong>/4000, RTM ISDN or RTM LAN can be used for Multiple Services<br />

configuration. However, if RTM ISDN is installed and used for Multiple Services<br />

configuration, only one Network Service can be associated with the media card to<br />

which the RTM ISDN card is attached.<br />

• On <strong>RMX</strong> 1500, when Multiple Network Services option is enabled, the two networks<br />

must differ in their subnet masks.<br />

• On the <strong>RMX</strong> 1500, LAN redundancy cannot be enabled in parallel to Multiple<br />

Networks and the LAN_REDUNDANCY flag must be set to NO when the Multiple<br />

Networks option is enabled.<br />

• An IP Network Service can be associated with one or several media cards.<br />

• If more than one card is associated with the same Network Service, the system routes<br />

the calls to the appropriate card according to resource availability<br />

• Participants on different networks can connect to the same conference with full audio,<br />

video and content capabilities.<br />

• Traffic on one network does not influence or affect the traffic on other networks<br />

connected to the same MCU, unless they are connected to the same media card. If one<br />

network fails, it will not affect the traffic in the other connected networks, unless they<br />

are connected to the same media card and the card fails.<br />

• Maximum number of services that can be defined per <strong>RMX</strong> platform:<br />

Table 15-25 Maximum Number of Network Services per <strong>RMX</strong> System<br />

<strong>RMX</strong> Platform IP Network Services<br />

<strong>RMX</strong> 1500 Up to 2 1<br />

<strong>RMX</strong> <strong>2000</strong> Up to 2 (combination of RTM ISDN and/or<br />

RTM LAN) or<br />

Up to 4 (using 2 RTM LAN cards, less<br />

when using up to 2 RTM ISDN cards)<br />

Management<br />

Services<br />

15-46 <strong>Polycom</strong>, Inc.<br />

1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!