RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Creating a Video Switching Profile
A Video Switching enabled Profile must be created prior to running Video Switching
conferences.
Video Switching conferences and Meeting Rooms are created by selecting a Video
Switching-enabled Profile and must be set to the same line rate as the target conference.
To connect to an Video Switching conference via an Entry Queue, the Entry Queue must be
Video Switching enabled. It is recommended to use the same Profile for both the target
conference and Entry Queue.
To Create a Video Switching Enabled Profile:
1 In the New Profile – General tab, in the Line Rate field, select the line rate required for the
conference, that all connecting participants can use. Participants that their endpoint or
network that do not support this line rate cannot connect to the conference.
If a high definition resolution is selected, make sure that the selected line rate is higher
than the line rate minimum threshold defined in the flag HD_THRESHOLD_BITRATE
for HD video Switching conferences.
2 Select the Video Switching check box.
3 Select the resolution for the conference:
Resolution supported by MPM media cards:
— H.264 720p30
Resolutions supported by MPM+ and MPMx cards only:
— H.264 1080p30
— H.264 720p60
1-44 Polycom, Inc.