RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Video Session Modes
Table 1-1 Default Conference Profile Settings (Continued)
Setting Value
Layout Auto Layout - Enabled
Same Layout - Disabled
Skin Polycom
IVR Name Conference IVR Service
This Profile is automatically assigned to the following conferencing entities:
Name ID
Meeting Rooms
Maple_Room 1001
Oak_Room 1002
Juniper_Room 1003
Fig_Room 1004
Entry Queue
Default EQ 1000
The RMX offers two Video Session Modes:
• Continuous Presence
• Video Switching
The video session type determines the video display options (full screen or split screen with
all participants viewed simultaneously) and the method in which the video is processed by
the MCU (with or without using the MCU’s video resources).
Continuous Presence (CP) Conferencing
The Continuous Presence mode offers 35 layouts to accommodate different numbers of
participants and conference settings including support of the VUI annex to the H.264
protocol for endpoints that transmit wide video instead of 4CIF resolution.
For conferences with more participants than display squares, the RMX dynamic video mix
capability allows the viewed sites to be modified throughout the conference. The displayed
layout can be changed during an ongoing conference, allowing a participant to view
different screen layouts of the other conference participants. These layout options allow
conferences to have greater flexibility when displaying a large number of participants and
maximizes the screen’s effectiveness.
1-2 Polycom, Inc.