RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Table C-8 Event Fields for Event 2 - CONFERENCE END
Field Description
Conference End
Cause
Appendix C-CDR Fields - Unformatted File
Indicates the reason for the termination of the conference, as follows:
1 - The conference is an ongoing conference or the conference was
terminated by an MCU reset.
2 - The conference was terminated by a user.
3 - The conference ended at the scheduled end time.
4 - The conference ended automatically because no participants joined the
conference for a predefined time period, or all the participants disconnected
from the conference and the conference was empty for a predefined time
period.
5 - The conference never started.
6 - The conference could not start due to a problem.
8 - An unknown error occurred.
9 - The conference was terminated by a participant using DTMF codes.
Table C-9 Event fields for Event 3 - ISDN/PSTN CHANNEL CONNECTED
Field Description
Participant Name The name of the participant.
Participant ID The identification number assigned to the participant by the MCU.
Channel ID The channel identifier.
Number of
Channels
The number of channels being connected for this participant.
Connect Initiator Indicates who initiated the connection, as follows:
0 - RMX
1 - Participant
Any other number - Unknown
Call Type The call type, as follows:
68 - 56 KBS data call
72 - 1536kbs data call (PRI only)
75 - 56 KBS data call
77 - Modem data service
79 - 384kbs data call (PRI only)
86 - Normal voice call
Network Service
Program
The Network Service program, as follows:
0 - None
1 - ATT_SDN or NTI_PRIVATE
3 - ATT_MEGACOM or NTI_OUTWATS
4 - NTI FX
5 - NTI TIE TRUNK
6 - ATT ACCUNET
8 - ATT 1800
16 - NTI_TRO
Polycom, Inc. C-15