RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
There are two Resource Capacity modes in MPM+ and MPMx Mode:
• Flexible Resource Capacity
• Fixed Resource Capacity
Flexible Resource Capacity
Flexible Resource Capacity is the default resource allocation mode in MPM+ and MPMx Mode
and is functionally identical to the MPM Flexible Resource Capacity described above.
On the RMX1500 MPMx-Q assembly, the use of HD with Continuous Presence requires an
additional license. In the Resource Report and Resolution Configuration panes, HD settings are
displayed but are not enabled and if HD is selected the system will enable SD by default.
To allocate Audio Only ports in MPM+ and MPMx mode:
1 Optional (otherwise skip to step 2): If the RMX is in Fixed Resource Capacity mode:
a In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
b In the Resource Capacity Mode box, select Flexible Resource Capacity.
c Click OK.
2 In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
If switching from Fixed mode, all video resources are allocated as CIF video ports.
3 Continue with Step 2 of the MPM Mode Flexible Resource Capacity procedure described
above.
Fixed Resource Capacity
To allocate resources in Fixed Resource Capacity mode:
Resource re-configuration (if the system is already set to Fixed Resource Capacity mode) should
only be performed when no conferences are running on the RMX.
1 Optional (otherwise skip to step 2): If the RMX is not in Fixed Capacity Mode.
a In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
b In the Resource Capacity Mode box, click Fixed.
Capacity Mode Radio Buttons
c Click OK.
2 In the RMX menu, click Setup > Video/Voice Port Configuration.
20-12 Polycom, Inc.