RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
IP Network Service Definition
Use this procedure to define Network Services in addition to the Network Service already
defined during first entry installation and configuration. Each of the defined Network
Service can be associated with one or more media cards installed in the system (depending
on the system type).
Once a media card is associated with a Network Service it cannot be associated with
another network service.
To add new/additional Network Services:
1 In the Device Management pane, click IP Network Services ( ).
2 In the Network Services list toolbar, click the Add Network Service button.
The New IP Service - Networking IP dialog box opens.
3 Define the following fields:
Table 15-32 IP Network Service - IP Parameters
Field Description
Network Service
Name
Enter the IP Network Service name.
Note: This field is displayed in all IP Signaling dialog boxes and can
contain character sets that use Unicode encoding.
15-54 Polycom, Inc.