19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Polycom</strong> <strong>RMX</strong> 1500/<strong>2000</strong>/4000 Administrator’s <strong>Guide</strong><br />

Table 21-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)<br />

Flag Description<br />

IP_LINK_ENVIRONMENT In H.239-enabled MIH Cascading, when MGC is on level 1,<br />

setting this flag to YES will adjust the line rate of HD Video<br />

Switching conferences run on the <strong>RMX</strong> 1500/<strong>2000</strong>/4000 from<br />

1920Kbps to 18432, 100bits/sec to match the actual rate of<br />

the IP Only HD Video Switching conference running on the<br />

MGC.<br />

Note: If the flag MIX_LINK_ENVIRONMENT is set to NO, the<br />

IP_ENVIRONMENT_LINK flag must be set to YES.<br />

ITP_CERTIFICATION When set to NO (default), this flag disables the telepresence<br />

features in the Conference Profile.<br />

Set the flag to YES to enable the telepresence features in the<br />

Conference Profile (provided that the appropriate License is<br />

installed).<br />

LAN_REDUNDANCY Enables Local Area Network port redundancy on <strong>RMX</strong> <strong>2000</strong>/<br />

4000 RTM LAN Card and <strong>RMX</strong> 1500 LAN ports on the RTM<br />

IP 1500.<br />

Default: YES<br />

Range: YES / NO<br />

MAX_RTV_RESOLUTION Enables you to override the <strong>RMX</strong> resolution selection and limit<br />

it to a lower resolution, hence minimizing the resource usage<br />

to 1 or 1.5 video resources per call instead of 3 resources.<br />

Possible flag values are:<br />

AUTO (default), QCIF, CIF, VGA or HD720.<br />

MAX_ALLOWED_RTV_HD_<br />

FRAME_RATE<br />

MAXIMUM_RECORDING_LI<br />

NKS<br />

MINIMUM_FRAME_RATE_T<br />

HRESHOLD_FOR_SD<br />

Defines the threshold Frame Rate (fps) in which RTV Video<br />

Protocol initiates HD resolutions.<br />

Flag values are as follows:<br />

Range: 0-30 (fps)<br />

Default: 0 (fps) - Implements any Frame Rate based on Lync<br />

RTV Client capabilities<br />

The maximum number of Recording Links available for<br />

selection in the Recording Links list and the Conference<br />

Profile - Recording dialog box.<br />

Range: 1 - 100<br />

Default: 20<br />

Low quality, low frame rate video is prevented from being sent<br />

to endpoints by ensuring that an SD channel is not opened at<br />

frame rates below the specified value.<br />

Range: 0 -30<br />

Default: 15<br />

MIN_H239_HD1080_RATE Used to set the threshold line rate for HD Resolution Content :<br />

the line rate at which the <strong>RMX</strong> will send Content at HD1080<br />

Resolution. Setting the flag to 0 disables HD Resolution<br />

Content.<br />

Default: 768 kbps.<br />

21-24 <strong>Polycom</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!