RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Table F-3 Directory Services - Configuration (Continued)
Field Description
IP Address or DNS
Name
3 Click the Role Mapping tab.
The Directory Services - Role Mapping dialog box is displayed.
Appendix F-Secure Communication Mode
Each of the RMX user types: Administrator, Auditor, Operator and Chairperson can be
mapped to only one Active Directory Group or Role according to the customer’s specific
implementation.
— In Ultra Secure Mode there are only two user types: Operator and Administrator.
— An RMX user that belongs to multiple Active Directory Groups is assigned to the
Group with the least privileges.
4 Map the RMX User Types, to their Active Directory roles by modifying the following
fields.
5 Click OK.
Enter the IP address or DNS name of the Enterprise Directory Server
(Active Directory).
Port Select the Port according to the Authentication Protocol to be used:
• 389 - NTLM over TCP
• 636 - NTLM over TLS
Search Base DN Enter the starting point when searching for User and Group
information in the Active Directory.
For example if the Domain Name is:
mainoffice.bigcorp.com.uk
The entry in this field should be:
CN=Users,DC=mainoffice,DC=bigcorp,DC=come,DC=uk
Authentication Type Only NTLM can be used.
Table F-4 Directory Services - Role Mapping
Field Description
Administrator
Operator
Chairperson
Auditor
At least one of these User Types must be mapped to an Active
Directory Role.
Polycom, Inc. F-21