RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom 1500/RMX 2000/4000 Administrator’s Guide
Table C-14 Event Fields for Events 10, 101, 105 - DEFINED PARTICIPANT, USER ADD
PARTICIPANT, USER UPDATE PARTICIPANT
Field Description
User Name The login name of the user who added the participant to the conference, or
updated the participant properties.
Participant Name The name of the participant.
Participant ID The identification number assigned to the participant by the MCU.
Dialing Direction The dialing direction, as follows:
0 - Dial-out
5 - Dial-in
Bonding Mode Not supported.
Always contains the value 0.
Number Of
Channels
Note: This field is only relevant to ISDN/PSTN participants.
The number of channels being connected for this participant.
Net Channel Width Not supported.
Always contains the value 0.
Network Service
Name
The name of the Network Service.
An empty field “” indicates the default Network Service.
Restrict Not supported.
Always contains the value 0.
Audio Only Indicates the participant’s Audio Only setting, as follows:
0 - The participant is not an Audio Only participant
1 - The participant is an Audio Only participant
255 - Unknown
Default Number
Type
Net Sub-Service
Name
Note: This field is only relevant to ISDN/PSTN participants.
The type of telephone number, as follows:
0 - Unknown
1 - International
2 - National
3 - Network specific
4 - Subscriber
6 - Abbreviated
255 - Taken from Network Service, default
Note: For dial-in participants, the only possible value is:
255 - Taken from Network Service
Not supported.
This field remains empty.
C-20 Polycom, Inc.