RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

— H.264 720p30
— H.264 SD 30
— H.264 CIF
— H.263 CIF
— H.261 CIF
Chapter 1-Conference Profiles
When Video Switching is selected for the conference, the following options are not
available:
— Operator Conference
— Gathering Phase
— Video Settings:
• Presentation Mode
• Send Content To Legacy Endpoints
• Auto Layout/Same Layout (only full screen, 1x1 layout display is available)
• Auto Scan
— Skins
— Site Names
— Message Overlay
4 Define the various Profile parameters. For more information, see "Defining Profiles” on
page 1-10.
5 Click OK.
H.264 High Profile Support in Video Switching Conferences
Beginning with Version 7.6, the H.264 High Profile video protocol is supported in Video
Switching (VSW) conferences.
Guidelines
• H.264 High Profile is supported in VSW conferences:
— With MPMx cards.
— In H.323 and SIP networking environments only (VSW conferences are not
supported in ISDN networking environments.)
• For H.264 High Profile enabled VSW conferences:
— All endpoints connecting to the conference must support High Profile.
— Endpoints that support High Profile, connecting to the VSW conference at the exact
line rate and exact resolution defined for the conference are connected using the High
Profile video protocol.
— Endpoints that do not support High Profile, connecting to the VSW conference at
the exact line rate and exact resolution defined for the conference are connected to
the conference as secondary (audio only).
• For non-H.264 High Profile enabled VSW conferences:
— High Profile supporting and non-High Profile supporting endpoints connecting to
the VSW conference at the exact line rate and exact resolution defined for the
conference are connected using the H.264 non-High Profile video protocol.
— Endpoints that do not support the exact line rate and exact resolution defined for the
conference will be connected to the conference as secondary (audio only).
Polycom, Inc. 1-45