RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Logger Diagnostic Files
Chapter 20-RMX Administration and Utilities
The Logger utility is a troubleshooting tool that continually records MCU system messages
and saves them to files in the MCU hard drive. For each time interval defined in the system,
a different data file is created. The files may be retrieved from the hard drive for off-line
analysis and debugging purposes.
The Logger utility is activated at the MCU startup. The Logger is disabled when the MCU is
reset manually or when there is a problem with the Logger utility, e.g. errors on the hard
drive where files are saved. In such cases, data cannot be retrieved.
When the MCU is reset via the RMX, the files are saved on the MCU hard drive.
To access the Logger Diagnostic Files:
>> On the RMX menu, click Administration > Tools > Logger Diagnostic Files.
The following tasks can be performed:
Table 20-19 Diagnostic File Button Options
Button Description
Refresh List Refreshes the list and adds newly generated logger files.
Select All Selects all the logger files listed.
Browse Selects the destination folder for download.
Retrieve Files Saves files to the destination folder.
When retrieved, the log file name structure is as follows:
• Sequence number (starting with 1)
• Date and Time of first message
• Date and Time of last message
• File size
• Special information about the data, such as Startup
File name structure:
Log_SNxxxxxxxxxx_FMDddmmyyy_FMThhmm_LMDddmmyyyy_LMThhmm_SZxxxxxxxxxx_SUY.log
Polycom, Inc. 20-53