RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Table 7-2 New Participant – General Properties (Continued)
Field Description
Phone Number
(ISDN/PSTN Only)
Alias Name/Type
(H.323 Only)
Extension/Identifier
String
Chapter 7-Address Book
Enter the phone number of the ISDN/PSTN participant.
Note: This field is only displayed when the ISDN/PSTN protocol is
selected.
If you are using the endpoint’s alias and not the IP address, first
select the type of alias and then enter the endpoint’s alias:
• H.323 ID (alphanumeric ID)
• E.164 (digits 0-9, * and #)
• Email ID (email address format,
e.g. abc@example.com)
• Participant Number (digits 0-9, * and #
Note:
• Although all types are supported, the type of alias is dependent on
the gatekeeper’s capabilities. The most commonly supported alias
types are H.323 ID and E.164.
• This field is used to enter the Entry Queue ID, target Conference
ID and Conference Password when defining a cascaded link.
• This field is removed from the dialog box when the ISDN/PSTN
protocol is selected.
Dial-out participants that connect to an external device such as
Cascaded Links or Recording Links may be required to enter a
conference password or an identifying string to connect. Enter the
required string as follows:
[p]…[p][string]
For example: pp4566#
p - optional - indicates a pause of one second before sending the
DTMF string. Enter several concatenated [p]s to increase the delay
before sending the string. The required delay depends on the
configuration of the external device or conference IVR system.
String - enter the required string using the digits 0-9 and the
characters * and #. The maximum number of characters that can be
entered is identical to the H.323 alias length.
If the information required to access the device/conference is
composed of several strings, for example, the conference ID and the
conference password, this information can be entered as one string,
where pauses [p] are added between the strings for the required
delays, as follows:
[p]…[p][string][p]…[p] [string]...
For example: p23pp*34p4566#
The RMX automatically sends this information upon connection to the
destination device/conference. The information is sent by the RMX as
DTMF code to the destination device/conference, simulating the
standard IVR procedure.
Polycom, Inc. 7-5