RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Defining the SNMP Parameters in the RMX
The SNMP option is enabled via the RMX Web Client application.
The addresses of the Managers monitoring the MCU and other security information are
defined in the RMX Web Client application and are saved on the MCU’s hard disk. Only
users defined as Administrator can define or modify the SNMP security parameters in the
RMX Web Client application.
To enable SNMP option:
1 In the RMX Web Client menu bar, click Setup > SNMP.
The RMX-SNMP Properties - Agent dialog box is displayed.
This dialog box is used to define the basic information for this MCU that will be used by
the SNMP system to identify it.
2 In the Agent dialog box, click the SNMP Enabled check box.
3 Click the Retrieve MIB Files button to obtain a file that lists the MIBs that define the
properties of the object being managed.
The Retrieve MIB Files dialog box is displayed.
4 Click the Browse button and navigate to the desired directory to save the MIB files.
5 Click OK.
The path of the selected directory is displayed in the Retrieve MIB Files dialog box.
6 Click the Save button.
The MIB files are saved to the selected directory.
7 Click Close to exit the Retrieve MIB Files dialog box.
20-30 Polycom, Inc.