RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

IP Participant Properties
Table 12-4 Participant Properties - Media Sources Parameters
Field Description
Name Indicates the participant’s name.
Note: This field is displayed in all tabs.
Chapter 12-Conference and Participant Monitoring
Endpoint Website Click the Endpoint Website hyperlink to connect to the internal website of
the participant’s endpoint. It enables you to perform administrative,
configuration and troubleshooting activities on the endpoint.
The connection is available only if the IP address of the endpoint’s internal
site is filled in the Website IP Address field in the Participant Properties -
General dialog box.
Note: This field is displayed in all tabs (excluding ISDN/PSTN
participants).
Layout Type Indicates whether the video layout currently viewed by the participant is the
Conference or Personal Layout. If Personal Layout is selected, you can
select a Video Layout that will be viewed only by this participant.
Video Layout Indicates the video layout currently viewed by the participant. When
Personal Layout is selected in the Layout Type you can force participants
to the video windows in a layout that is specific to the participant. For more
information, see RMX 1500/2000/4000 Getting Started Guide, "” on
page 3-65.
Mute/Suspend Indicates if the endpoint’s audio and/or video channels from the endpoint
have been muted/suspended. The entity that initiated audio mute or video
suspend is also indicated.
• MCU – Audio or Video channel has been muted/suspended by the
MCU.
• User – Channels have been muted/suspended by the RMX user.
• Participant – Channels have been muted/suspended by the
participant from the endpoint.
You can also cancel or perform mute and suspend operation using these
check boxes.
Block When checked, the audio transmission from the conference to the
participant’s endpoint is blocked, but the participant will still be heard by
other participants.
Polycom, Inc. 12-15