RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
6 Click the SIP Servers tab.
7 In the SIP Server, select Specify.
8 In the SIP Server Type, select Microsoft.
9 Enter the IP address of the Office Communications Server 2007 or Lync Server 2010 and
the Server Domain Name as defined in the OCS/Lync Server and in the Management
Network for the DNS.
10 If not selected by default, change the Transport Type to TLS.
The Create Certificate and Send Certificate buttons are enabled.
11 If you are using the CSR method, and the CSR option is not selected by default, change
the Certificate Method to CSR.
If you are using the PFX method, in the Certificate Method field select PEM/PFX.
At this point the procedure changes according to the selected certificate method.
If you have selected PEM/PFX, skip to step 27 on page H-42.
H-38 Polycom, Inc.