RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Resource Report
2 In the MCMS_PARAMETERS tab, double-click or select the flag
FORCE_CIF_PORT_ALLOCATION and click the Edit Flag button.
3 In the New Value field, clear the value entries.
4 Click OK.
Reset the MCU for changes to take effect. For more details, see the RMX 2000
Administrator’s Guide, "Resetting the RMX” on page 20-67
The Resource Report displays the real time resource usage according to the selected Resource
Capacity Mode:
• Flexible Resource Capacity Mode available in MPM, MPM+ and MPMx Modes.
• Fixed Resource Capacity Mode available only in MPM+ and MPMx Modes
On the RMX1500 MPMx-Q assembly, the use of HD with Continuous Presence requires an
additional license. In the Resource Report and Resolution Configuration panes, HD settings are
displayed but are not enabled and if HD is selected the system will enable SD by default.
The Resource Report also includes a graphic representation of the resource usage.
When the RMX is working in MPM+ or MPMx Mode with Fixed Resource Capacity Mode
selected, additional system resources information is displayed.
Displaying the Resource Report
1 In the main toolbar, click Administration > Resource Report.
The Resource Report dialog box is displayed, showing the resource usage according to
the Resource Capacity Mode. For each resource type, the Resource Report includes the
following columns:
Table 20-6 Resource Report Fields Parameters
Column Description
Type The type of audio/video resources available.
Total The Total column displays the total number of resources of that type
as configured in the system (Occupied and Free). This number
reflects the current audio/video port configuration. Any changes to
the resource allocation will affect the resource usage displayed in the
Resource Report.
Occupied The number of RMX resources that are used by connected
participants or reserved for defined participants.
20-16 Polycom, Inc.