19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 15-Network Services<br />

<strong>RMX</strong> 1500/4000: If you want to modify the LAN Port Speed Settings on an <strong>RMX</strong> 1500/<br />

4000, see "Ethernet Settings” on page 15-22.<br />

9 View or modify the following fields:<br />

Table 15-4 Management Network Properties – LAN Ports Parameters<br />

Field Description<br />

Port Speed The <strong>RMX</strong><strong>2000</strong> has 3 LAN ports. The administrator can set the speed<br />

and transmit/receive mode manually for LAN 2 Port only.<br />

Port The LAN port number: 1, 2 or 3.<br />

Note: Do not change the automatic setting<br />

of Port 1 and Port 3. Any change to Port 1 speed<br />

will not be applied.<br />

Speed Select the speed and transmit/receive mode for<br />

each port.<br />

Default: Auto – Negotiation of speed and transmit/<br />

receive mode starts at 1000 Mbits/second Full<br />

Duplex, proceeding downward to 10 Mbits/second<br />

Half Duplex.<br />

Note: To maximize conferencing performance,<br />

especially in high bit rate call environments, a 1Gb<br />

connection is recommended.<br />

10 Click OK.<br />

11 If you have modified the Management Network Properties, reset the MCU.<br />

<strong>Polycom</strong>, Inc. 15-9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!