RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
In the Alias Name/Type field, enter the ID of the cascade-enabled Entry Queue (EQ), the
Conference ID and Password of the destination conference (MCU B) as follows:
EQ ID#Destination Conference ID#Password (Password is optional).
For Example: 78485#24006#1234
Cascade-enabled
EQ ID
Method B (Using a gatekeeper):
Destination
Conference ID
Password (optional)
In the Alias Name field, enter the Prefix of MCU B, EQ ID, Destination Conference ID,
and Password, as follows:
MCU Prefix EQ ID#Conference ID#Password (Password is optional)
For Example: 92578485#24006#1234
MCU Prefix as
registered in the
gatekeeper
Cascade-enabled
EQ ID
Conference ID
Password (optional)
7 Click the Advanced tab.
8 In the Cascade field, select:
— Slave, if the participant is defined in a conference running on a Slave MCU and
will connect to the Master MCU (in the center of the topology).
— Master, if the participant is defined in a conference running on the Master MCU (in
the center of the topology) dialing from the Master MCU to the Slave MCU.
9 Click OK.
The cascade-enabled dial-out link is created and the system automatically dials out to
connect the participant to the linked conference, as well as the destination conference.
4-24 Polycom, Inc.