19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 2-Video Protocols and Resolution Configuration for CP Conferencing<br />

• Video Quality Optimized<br />

Video is optimized through higher resolution connections at lower line rates increasing<br />

the resource usage at lower line rates. This may decrease the number of participant<br />

connections.<br />

Use this option when the priority is to use higher video resolutions while decreasing the number of<br />

participant connections.<br />

The Video Quality Optimized settings are described in the section: "The CP Resolution<br />

Decision Matrix” on page 2-4.<br />

• Manual<br />

The administrator adjusts the sliders to accommodate local conferencing requirements.<br />

Sharpness / Motion Resolution Slider Panes<br />

Sharpness and Motion are Video Quality settings that are selected per conference and are<br />

defined in the conference Profile and they determine the resolution matrix that will be<br />

applied globally to all conferences according to the selection of Sharpness or Motion. The<br />

resolution matrix for Sharpness or Motion is determined by the resolution configuration and<br />

can be viewed in the Resolution Configuration sliders.<br />

System Resource usage is affected by the Resolution Configuration settings.<br />

Example<br />

As shown in following diagram:<br />

• Moving the HD720p30 resolution slider from 1024kbps to 1920kbps increases the<br />

minimum connection threshold line rate for that resolution. Endpoints connecting at<br />

line rates between 1024kbps and 1920kbps that would have connected at<br />

HD 720p30 resolution will instead connect at SD 30 resolution. Each of the affected<br />

endpoints will connect at lower resolution but will use 1.5 system resources instead of 3<br />

system resources.<br />

• Moving the HD1080p30 resolution slider from 4096kbps to 2560kbps decreases the<br />

minimum connection threshold line rate for that resolution. Endpoints connecting at<br />

line rates between 2560kbps and 4096kbps that would have connected at<br />

HD 720p30 resolution will instead connect at HD 1080p30 resolution. Each of the<br />

affected endpoints will connect at higher resolution but will use 6 system resources<br />

instead of 3 system resources.<br />

<strong>Polycom</strong>, Inc. 2-15

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!