19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Polycom</strong> <strong>RMX</strong> 1500/<strong>2000</strong>/4000 Administrator’s <strong>Guide</strong><br />

Table 1-7 New Profile - General Parameters (Continued)<br />

Field/Option Description<br />

Routing Name Enter the Profile name using ASCII characters set.<br />

The Routing Name can be defined by the user or automatically<br />

generated by the system if no Routing Name is entered as follows:<br />

• If an all ASCII text is entered in Display Name, it is used also as<br />

the Routing Name.<br />

• If any combination of Unicode and ASCII text (or full Unicode text)<br />

is entered in Display Name, the ID (such as Conference ID) is<br />

used as the Routing Name.<br />

Video Switching If the Operator Conference option is selected, this option is disabled,<br />

and the selection is cleared.<br />

When selected, the conference is in a special conferencing mode<br />

which implies that all participants must connect at the same line rate<br />

and use the same video resolution. Participants with endpoints that<br />

do not support the selected line rate and resolution will connect as<br />

secondary (audio only).<br />

Select the video protocol and resolution for the conference.<br />

For more information, see "Video Switching (VSW) Conferencing” on<br />

page 1-3.<br />

Notes:<br />

• Video Switching conferencing mode is unavailable to ISDN<br />

participants.<br />

• To connect to a Video Switching conference via Entry Queue, the<br />

Profile assigned to the Entry Queue must be set to Video<br />

Switching. It is recommended to use the same profile for both the<br />

destination conference and Entry Queue.<br />

• Telepresence Mode is unavailable in Video Switching<br />

conferences.<br />

H.264 High Profile Select this check box to enable the use of H.264 High Profile in Video<br />

Switching conferences. For more information, see "H.264 High Profile<br />

Support in Video Switching Conferences” on page 1-45.<br />

Operator Conference<br />

(CP Only)<br />

4 Click the Advanced tab.<br />

Select this option to define the profile of an Operator conference.<br />

An Operator conference can only be a Continuous Presence<br />

conference, therefore when selected, the Video Switching option is<br />

disabled and cleared.<br />

When defining an Operator Conference, the Send Content to Legacy<br />

Endpoints option in the Video Settings tab is cleared and disabled.<br />

For more information, see Chapter 9, “Operator Assistance &<br />

Participant Move” on page 9-1.<br />

1-12 <strong>Polycom</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!