RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Table 21-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description
SEND_SIP_BUSY_UPON_R
ESOURCE_THRESHOLD
SITE_NAME_TRANSPAREN
CY
(MPM+ Only)
SITE_NAMES_ALWAYS_ON
(MPM+ Only)
SEND_WIDE_RES_TO_ISD
N
Chapter 21-System Configuration Flags
When set to YES, it enables the RMX to send a busy
notification to a SIP audio endpoint or a SIP device when
dialing in to the RMX whose audio resource usage exceeded
the Port Usage threshold.
When set to NO, the system does limit the SIP audio endpoint
connections to a certain capacity and will not send a busy
notification when the resource capacity threshold is
exceeded.
Default: NO
In MPM+ Mode this flag is used to enable or disable
transparency (50%) of the Site Name in the video layout.
Set the value of this flag to NO to disable Site Name
Transparency.
Default: YES.
In MPMx Mode this function is controlled using the Profile -
Site Names dialog box.
In MPM + Mode this flag is used to enable or disable the
permanent display of Site Name in the video layout.
Set the value of this flag to YES to enable the permanent
display of Site Names.
Default: NO.
In MPMx Mode this function is controlled using the Profile -
Site Names dialog box.
When set to YES, the RMX sends wide screen resolution to
ISDN endpoints.
When set to NO (default), the RMX does not send wide
screen resolution to ISDN endpoints.
Default: NO.
SEND_WIDE_RES_TO_IP When set to YES (default), the RMX sends wide screen
resolution to IP endpoints. Endpoint types that do not support
wide screen resolutions are automatically identified by the
RMX according to their product type and version and will not
receive the wide resolution even when the flag is set to YES.
When manually added and set to NO, the RMX does not send
wide screen resolution to all IP endpoints.
Default: YES.
Polycom, Inc. 21-27