RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Chapter 20-RMX Administration and Utilities
8 Login to the RMX using the Web Client, if you selected:
— Standard Restore, the Fast Configuration Wizard appears. For more information, see
the RMX 1500/2000/4000 Getting Started Guide, "Procedure 4: Modifying the Default IP
Service and ISDN/PSTN Network Service Settings” on page 2-27.
— Comprehensive Restore, requires initializing the First Entry Configuration
procedures, as defined in the RMX 1500/2000/4000 Getting Started Guide, "Procedure
1: First-time Power-up” on page 2-24.
To Restore Factory Default Settings using the USB key:
Restoring to factory defaults using the USB key method always results in a Comprehensive Restore.
Obtain the RestoreToFactoryDefault.txt file from you next level of support and add it to the USB key.
1 Insert the USB key in the workstation.
2 Check that the lan.cfg file on the USB key contains the correct settings for the
Management Network Service.
3 Verify that the USB key called includes the RestoreToFactoryDefault.txt file.
4 Power the RMX Off.
5 Remove the USB key from the workstation and insert it in the USB port on the RMX’s
back panel.
6 Power the RMX On.
7 In the RMX 1500/2000/4000 Getting Stared Guide, follow "Procedure 1: First-time Powerup”
on page 2-24.
Polycom, Inc. 20-71