RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Table 21-1 System Flags – MCMS_PARAMETERS (Continued)
Flag Description
Chapter 21-System Configuration Flags
HIDE_SITE_NAMES From version 7.6.1, in MPMx Card Configuration Mode, this
flag has been replaced by the Enable Site Names option in
the Conference Profile - Site Names dialog box. It allows you
to enable or disable the display of site names in conferences
per conference.
From Version 7.6, in MPM+ Card Configuration Mode, this
flag has been replaced by the Site Names option in the
Conference Properties - Video Settings dialog box. It allows
you to enable or disable the display of site names in
conferences per conference.
In versions prior to 7.6, set this flag to ON to cancel the
display of site names.
When set to ON and the display is disabled, the flag
SITE_NAMES_ALWAYS_ON =YES is ignored.
Default: OFF
Note: This option is unavailable in VSW conferences.
INTERNAL_SCHEDULER When set to NO (default) this flag prevents potential
scheduling conflicts from occurring as a result of system calls
from external scheduling applications such as Polycom
ReadiManager®, CMA 4000/5000 and others via the API.
Set to YES to schedule conference reservations using an
external scheduling application.
ISDN_COUNTRY_ CODE The name of the country in which the MCU is located.
Default: COUNTRY_NIL
ISDN_IDLE_CODE_E1 The Idle code (silent), transmitted on the ISDN E1 B
channels, when there is no transmission on the channels.
Default: 0x54
ISDN_IDLE_CODE_T1 The Idle code (silent), transmitted on the ISDN T1 B
channels, when there is no transmission on the channels.
Default: 0x13
ISDN_LEGACY_EP_CLOSE
_CONTENT_FORCE_H263
If set to YES, legacy ISDN endpoints that do not support
sharing content over the Content channel receive video over
video channel that is forced to H.263 video.
Default: NO.
ISDN_NUM_OF DIGITS When using ISDN Overlap sending dialing mode, this field
holds the number of digits to be received by the MCU.
Default: 9
Polycom, Inc. 21-5