RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Chapter 20-RMX Administration and Utilities
• Reconfigure the resource allocation.
• Click OK to activate the new resource allocation.
b Optional. Click the Cancel button to accept the resource allocation.
The System Alert remains active.
Forcing Video Resource Allocation to CIF Resolution
You can set the MCU to allocate one CIF video resource to an endpoint, regardless of the
resolution determined by the Conference Profile parameters. This forcing saves resources
and enables more endpoints to connect to conferences.
The forcing is done by modifying the system configuration and it applies to all conferences
running on the MCU.
You can specify the endpoint types for which resource allocation can be forced to CIF
resource, enabling other types of endpoints to use higher resolutions in the same conference.
For example, you can force the system to allocate one CIF video resource to CMAD and VSX
endpoints while HDX endpoints can connect using SD or HD video resources.
Once the endpoint connects to the conference, its type is identified by the RMX and, if
applicable, the RMX will connect it using one CIF resource, even if a higher resolution can
be used.
To force CIF resource:
1 On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 In the MCMS_PARAMETERS tab, click the New Flag button.
The New Flag dialog box is displayed.
3 In the New Flag field enter the flag name: FORCE_CIF_PORT_ALLOCATION
4 In the Value field enter the product type to which the CIF resource should be allocated.
Possible values are:
— CMA Desktop for CMA desktop client
— VSX nnnn where nnnn represents the model number for example, VSX 8000.
You can define several endpoint types, listing them one after the other separated by
semicolon (;).
For example, CMA Desktop;VSX 8000.
5 Click OK.
The new flag is added to the flags list.
Reset the MCU for changes to take effect. For more details, see the RMX 2000
Administrator’s Guide, "Resetting the RMX” on page 20-67.
To cancel the forcing of CIF resource:
1 On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
Polycom, Inc. 20-15