RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

To define a new Profile:
1 In the RMX Management pane, click Conference Profiles.
2 In the Conference Profiles pane, click the New Profile button.
The New Profile – General dialog box opens.
3 Define the Profile name and, if required, the Profile - General parameters:
Table 1-7 New Profile - General Parameters
Field/Option Description
Chapter 1-Conference Profiles
Display Name Enter a unique Profile name, as follows:
• English text uses ASCII encoding and can contain the most
characters (length varies according to the field).
• European and Latin text length is approximately half the length of
the maximum.
• Asian text length is approximately one third of the length of the
maximum.
It is recommended to use a name that indicates the Profile type, such
as Operator conference or Video Switching conference.
Note: This is the only parameter that must be defined when creating
a new profile.
Note: This field is displayed in all tabs.
Line Rate Select the conference bit rate. The line rate represents the combined
video, audio and Content rate.
The default setting is 384 Kbps.
Notes:
• This field is displayed in all tabs.
• Maximum line rate at which ISDN endpoints can connect to a
conference is 768 kbps.
Polycom, Inc. 1-11