19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

ISDN Disconnection Causes<br />

Table A-2 ISDN Disconnection Causes<br />

Disconnection Cause<br />

Number Summary Description<br />

1 Unallocated<br />

(unassigned number)<br />

2 No route to specified<br />

transit network<br />

(national use)<br />

Appendix A-Disconnection Causes<br />

No route to the number exists in the ISDN network or the<br />

number was not found in the routing table.<br />

• Ensure that the number appears in the routing table.<br />

• Ensure that it is a valid number and that correct digits<br />

were dialed.<br />

The route specified (transit network) between the two<br />

networks does not exist.<br />

3 No route to destination No physical route to the destination number exists although<br />

the dialed number is in the routing plan.<br />

• The PRI D-Channel is malfunctioning.<br />

• Incorrect connection of the span or WAN.<br />

4 Send special<br />

information tone<br />

5 Misdialed trunk prefix<br />

(national use)<br />

Return the special information tone to the calling party<br />

indicating that the called user cannot be reached.<br />

A trunk prefix has erroneously been included in the called<br />

user number.<br />

6 Channel Unacceptable The sending entity in the call does not accept the channel<br />

most recently identified.<br />

7 Call awarded and<br />

being delivered in an<br />

Established channel<br />

The incoming call is being connected to a channel previously<br />

established for similar calls.<br />

8 Pre-Emption The call has been pre-empted.<br />

9 Pre-Emption – Circuit<br />

reserved for reuse<br />

Call is being cleared in response to user request.<br />

16 Normal Call Clearing Call cleared normally because user hung up.<br />

17 User Busy Dialed number is busy.<br />

18 No User Responding The called user has not answered the call.<br />

19 No Answer from User<br />

(User Alerted)<br />

Called user has received call alert, but has not responded<br />

within a prescribed period of time. Internal network timers<br />

may initiate this disconnection.<br />

20 Subscriber Absent User is temporarily absent from the network - as when a<br />

mobile user logs off.<br />

21 Call Rejected Called number is either busy or has compatibility issues.<br />

Supplementary service constraints in the network may also<br />

initiate the disconnection.<br />

<strong>Polycom</strong>, Inc. A-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!