RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
For more information, see "Modifying System Flags” on page 21-1.
In versions 3.0 and earlier, these flags have to be manually added to the
MCMS_PARAMETERS_USER dialog box. In version 4.0 and later, these flags are automatically
listed in the MCMS_PARAMETERS_USER dialog box.
Table 7-4 System Flags for CMA Address Book Integration
Flag Description
EXTERNAL_
CONTENT_
DIRECTORY
EXTERNAL_
CONTENT_IP
EXTERNAL_
CONTENT_
PASSWORD
EXTERNAL_
CONTENT_
USER
The Web Server folder name. Change this name if you have changed
the default names used by the CMA application.
Default: /PlcmWebServices
Version 4.x and earlier - enter the IP address of the CMA server. For
example: 172.22.185.89.
Version 5.0.x and version 6.0.x - enter the IP address of the CMA
server in the format:
http://[IP address of the CMA server].
For example, http://172.22.185.89.
Version 7.0.x and later - enter the IP address of the CMA server. For
example: 172.22.185.89.
This flag is also the trigger for replacing the internal RMX address
book with the CMA global Address Book.
Leave this flag blank to disable address book integration with the
CMA server.
The password associated with the user name defined for the RMX in
the CMA server.
The login name defined for the RMX in the CMA server defined in the
format:
domain name/user name.
3 Click OK to complete the definitions.
4 When prompted, click Yes to reset the MCU and implement the changes to the system
configuration.
7-20 Polycom, Inc.