RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Table 4-6 New Participant – Dial-out Cascade Link (Continued)
Field Description
Alias Name If you are using the target MCU IP address, enter the dial string made
up of the ID of the cascade enabled Entry Queue and the Conference
ID as follows:
##
For example: 78485##24006
4 Click the Advanced tab.
If a gatekeeper is used, you can enter the prefix of the target MCU,
registered with the gatekeeper, instead of the IP address, as part of
the dialing string.
##
For example: 92578485##24006
If the conference has a password and you want to include the
password in the dial string, append the password to in the dial string
after the Conference ID.
For example: 78485##24006##1234
If the conference has a password and you do not want to include the
password in the dial string, set the
ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_
PASSWORD
flag to YES.
For more information see “Modifying System Flags” on page 11-5.
Alias Type Select E.164 (digits 0-9, *, #).
5 In the Cascade field, select:
— Slave, if the participant is defined in a conference running on a Slave MCU.
4-34 Polycom, Inc.