RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom RMX 1500/2000/4000 Administrator’s Guide
Table 21-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description
FORCE_CIF_PORT_ALLOC
ATION
FORCE_ENCRYPTION_FO
R_UNDEFINED_PARTICIPA
NT_IN_WHEN_AVAILABLE_
MODE
Sets the MCU to allocate one CIF video resource to an
endpoint, regardless of the resolution determined by the
Conference Profile parameters. You can specify the endpoint
types for which resource allocation can be forced to CIF
resource, enabling other types of endpoints to use higher
resolutions in the same conference.
Enter the product type to which the CIF resource should be
allocated. Possible values are:
• CMA Desktop - for CMA desktop client
• VSX nnnn - where nnnn represents the model number for
example, VSX 8000.
When set to YES (default), Undefined participants must
connect encrypted, otherwise they are disconnected.
When set to NO and the conference Encryption in the Profile
is set to “Encrypt When Possible”, both Encrypted and Nonencrypted
Undefined participants can connect to the same
conferences, where encryption is the preferred setting.
Default: YES
FORCE_RESOLUTION Use this flag to specify IP (H.323 and SIP) endpoint types that
cannot receive wide screen resolution and that were not
automatically identified as such by the RMX.
Possible values are endpoint types, each type followed by a
semicolon. For example, when disabling Wide screen
resolution in an HDX endpoint enter the following string: HDX;
Note: Use this flag when the flag SEND_WIDE_RES_TO_IP
is set to YES.
FORCE_STATIC_MB_ENCO
DING
This flag supports Tandberg MXP mode of sending and
receiving video by IP endpoint in HD 720p resolution and
Video Quality set to Motion. This mode is not supported for
ISDN endpoints.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
G728_IP Enables or disables declaration of G.728 Audio Algorithm
capabilities in IP calls.
Range: YES / NO
Default: NO
G728_ISDN Enables or disables declaration of G.728 Audio Algorithm
capabilities in ISDN calls.
Range: YES / NO
Default: NO
21-22 Polycom, Inc.