19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Polycom</strong> <strong>RMX</strong> 1500/<strong>2000</strong>/4000 Administrator’s <strong>Guide</strong><br />

3 Modify the following fields:<br />

Table 15-1 Default Management Network Service – IP<br />

Field Description<br />

Network Service<br />

Name<br />

Displays the name of the Management Network. This name cannot be<br />

modified.<br />

Note: This field is displayed in all Management Network Properties tabs.<br />

IP <strong>Version</strong> IPv4 Select this option for IPv4 addressing only.<br />

IPv6 Configuration<br />

Method<br />

IPv6 Select this option for IPv6 addressing only.<br />

IPv4 & IPv6 Select this option for both IPv4 and IPv6<br />

addressing.<br />

Note: If the gatekeeper cannot operate in IPv6<br />

addressing mode, the H323_RAS_IPV6 System<br />

Flag should be set to NO.<br />

For more information see Table 21-2, “System<br />

Flags – CS_MODULE_PARAMETERS,” on<br />

page 21-15.<br />

Auto (Stateless) Select this option to allow automatic generation of<br />

the following addresses:<br />

• Link-Local (For internal use only)<br />

• Site-Local<br />

• Global<br />

Manual Select his option to enable manual entry of the<br />

following addresses:<br />

• Site-Local<br />

• Global<br />

Manual configuration of the following address<br />

types is not permitted:<br />

• Link-Local<br />

• Multicast<br />

• Anycast<br />

15-4 <strong>Polycom</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!